2025 Shower Enclosure Selection Guide: 12 Renovation Pitfalls + Best Solutions
In the home decoration trends of 2025, shower rooms have become a standard feature in bathroom Spaces. However, many people fall into various "traps" during the decoration process due to neglecting details. This article will combine 12 real cases to help you avoid decoration traps and provide the best solutions to make your shower room both beautiful and durable.
Case 1: The shower enclosure is too small in size
Description of the problem: After installation, it is difficult to turn around while taking a bath, especially for the arc-shaped door model.
Best solution: Accurately measure the space before decoration. It is recommended that the width be ≥ 900mm and the height be 1900-2000mm. Arc-shaped doors need to reserve sufficient space for movement.
Case 2: Cracked glass poses a safety hazard
Description of the problem：Cracks appeared in the glass within half a year, posing a safety risk.
Best solution：Select 3C-certified tempered glass with a thickness of 8mm to 10mm. Avoid being hit by sharp objects.
Case 3: The waterproofing was not done well, causing water seepage and mold
Description of the problem：After installation, water seeped through the wall or floor, causing mold.
Best solution：Before construction, the ground level and waterproof coating should be ≥30cm. The joints are treated with glass glue for waterproofing.
Case 4: The track of the sliding door is rusty
Description of the problem：The track rusts and slips and gets stuck in a damp environment.
Best solution：The track rusts and slips and gets stuck in a damp environment.
Case 5: Loose hardware
Description of the problem：Loose door handles and hinges affect usage.
Best solution：Choose high-strength hardware accessories and regularly check the tightness of screws.
Case 6: Poor drainage
Description of the problem：There was severe water accumulation when taking a bath.
Best solution：The ground slope should be no less than 1.5%, and large-flow drainage outlets should be selected.
Case 7: The direction of opening the door is incorrect
Description of the problem：The direction of the door opening conflicts with the toilet/cabinet.
Best solution：Simulate the door opening route before installation to avoid collision.
Case 8: The sealing strip is moldy
Description of the problem：The sealing strip has become damp and moldy for a long time.
Best solution：Use anti-mold material sealing strips and wipe them regularly to keep them dry.
Case 9: Insufficient reserved space
Description of the problem：The bathroom door is crowded, making it impossible to enter the shower area smoothly.
Best solution：Make a reasonable layout and leave at least 60cm of passage.
Case 10: Unreasonable lighting arrangement
Description of the problem：The bathing area is dimly lit.
Best solution：Install waterproof lamps with warm and soft light sources.
Case 11: Budget overrun
Description of the problem：The budget was overspent by replacing high-end materials halfway through.
Best solution：The budget was overspent by replacing high-end materials halfway through.
Case 12: Neglecting anti-slip floor tiles
Description of the problem：The ground is slippery and it's easy to fall.
Best solution：The ground is slippery and it's easy to fall.
Conclusion
When decorating a shower enclosure, it is not only a balance between aesthetics and practicality, but also a combination of safety and comfort. By referring to the above 12 cases and avoiding problems in advance, your bathroom can truly become a space for relaxation.